 |
 |
|
Our Product
Cabinet Screws GRK Cabinet Screws were designed specifically for uses in cabinet construction and installation. All Cabinet Screws are manufactured in a #8 gauge (4 mm) diameter. Lengths range from 1"1/4 (30 mm) to 2"3/4 (70 mm). These screws are thin enough to prevent most material splitting while still providing sufficient strength to guarantee a secure installation. The Cabinet Screw washer head design presses flush against any cabinet surface. Builders have also discovered new uses for this screw. In some cases, short Cabinet Screws have been used in vinyl siding installation. For this purpose all Cabinet Screws are coated with GRK's exclusive Climatek corrosion protection. Trim Screws GRK Trim Screws are ideal for most fine carpentry applications, as well as window extension jams and more. Our Trim Screws provide end users with the smallest screw head on the market. With sizes available from 1"1/2 (40 mm) to 5" (125 mm), users have plenty of choice. The Trim Screws exceptionally small head, along with the W-Cut thread design, prevent most material splitting. Pre-drilling is only necessary if the building material's limitations require a pilot hole to be drilled. Trim Screws also come with a 1,200+ hour salt spray, Climatek corrosion protection. In case you are using our Trim Screws in vinyl or composite decking, this will come in very handy. FOR BEST RESULTS, TRIM SCREWS SHOULD BE DRIVEN AT HALF SPEED.
|
 |